crwdns2915892:0crwdne2915892:0
This guide will show the user how to replace the Camera Lens
crwdns2942213:0crwdne2942213:0
-
-
Ensure the phone is switched off. Then press down firmly against the Cingular icon with your thumb.
-
Slide the panel down and remove the latch
-
-
-
Lift the battery with your fingers and pull it out of the casing.
-
Remove the SIM card as well if you have one
-
-
-
Remove the two outer screws using a T7 Torx screwdriver.
-
-
-
-
Remove the two smaller inner screws with the Mini-Phillips screwdriver.
-
-
-
Remove the back faceplate on the camera side with the blue hand wedge.
-
-
-
Flip the phone over and pry off the front faceplate using multiple blue hand-wedges.
-
Separate the keypad from the logic board by turning it upside down and allowing it to fall into your hand.
-
-
-
Remove the two remaining screws at the top corners of the phone.
-
-
-
Remove the logic board with multiple blue hand-wedges. Prise the logic board away carefully to avoid damaging it or snapping the wiring.
-
-
-
From the inside of the panel, press down on the camera lens to pop it out of its mounting.
-
Replace the lens and reverse the process to reassemble the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
James Madison, Team 2-2, Allen Fall 2011 crwdns2935289:0James Madison, Team 2-2, Allen Fall 2011crwdne2935289:0
JMU-ALLEN-F11S2G2
crwdns2931471:02crwdne2931471:0
crwdns2935297:010crwdne2935297:0
