crwdns2915892:0crwdne2915892:0
The cable is the power supply for the DVD player it is used to give power to every component and is an external cord that stays outside the DVD Player. Make sure to unplug the cable before beginning.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips screwdriver to unscrew the five screws.
-
-
-
Use the Philips screwdriver to remove the screws located on the sides and the back.
-
-
-
Use a spudger to separate the case from the chassis.
-
Remove the case.
-
-
-
-
Unscrew all screws using a Phillips screwdriver removing the outer case to access the power cable.
-
-
-
Using a finger, press down on the clip to remove the connector for the cable.
-
-
-
Using two fingers, press in both the top and bottom clips to release the holder for the power cable to remove the cable completely.
-
-
-
Pull the cable out of the case to fully replace the cable.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 6-7, Kilpatrick Fall 2023 crwdns2935289:0University of North Texas, Team 6-7, Kilpatrick Fall 2023crwdne2935289:0
UNT-KILPATRICK-F23S6G7
crwdns2934841:01crwdne2934841:0
crwdns2935297:04crwdne2935297:0
