crwdns2915892:0crwdne2915892:0
To access the internals of the Sony DVP-FX730, the cover must be removed. If there is a problem with one of the components on the cover, it may need to be replaced. A screwdriver should be used to remove screws and rubber feet to remove the cover successfully.
crwdns2942213:0crwdne2942213:0
-
-
Remove the five exposed 7.9 mm screws using a Phillips screwdriver.
-
Punch through the warranty sticker with the spudger.
-
Remove the screw underneath with the Phillips screwdriver.
-
-
-
Remove the rubber feet using the spudger.
-
Remove the screws that were covered by the rubber feet.
-
-
-
-
Hold on to the corners of the cover and gently lift the cover.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Gently remove the wires with tweezers by pulling up on the base they are attached to.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.