crwdns2915892:0crwdne2915892:0
The following is a guide to disassemble the camera into two primary halves. It will serve as prerequisite guide to few a other guides hosted by this page.
crwdns2942213:0crwdne2942213:0
-
-
Remove all the 4.3mm screws on the bottom using a J000 Phillips screwdriver. There should be seven screws (4 silver, 2 black).
-
-
-
Remove the 5mm #0 Phillips screws on the underside of the LCD tuck-a-way.
-
-
-
-
Remove the 2mm #0 Phillips screw behind the battery.
-
-
-
Open the dvd cover and remove the 3 4.3mm phillips screws. Including ones in the corners that may be hidden.
-
-
-
Once all the screws are removed you can safely pry open the camera case using a spudger.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.