crwdns2915892:0crwdne2915892:0
Make sure you have the necessary tools in order to complete the LCD screen replacement for the Sony Cyber Shot WX80 and be sure to have a steady hand when dealing with the smaller and more fragile parts.
crwdns2942213:0crwdne2942213:0
-
-
Begin by removing all six 40mm by 10mm black screws holding the outer frame together with the Phillips #00 screwdriver.
-
-
-
Remove the free-moving flap near the battery port and store in a safe place.
-
Pry the front cover off gently. Use a plastic opening tool if available.
-
Now pry the back cover off gently, using a plastic opening tool if available.
-
-
-
-
Remove the #00 screw from the right hand side (from the LCD screen side) which is adjacent to the master control dial.
-
Use a spudger or plastic opening tools to pry up the LCD screen and free the two metal tangs on the left side.
-
Lift up two more metal tabs held down by a thin red plastic strap on the right (master control dial) side. Reference the third image.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using a pair of tweezers, remove the blue ribbon from its connection located toward to the top right of the device.
-
Using a pair of tweezers, remove the gold ribbon from its connection located to the right of the removed blue ribbon.
-
Your LCD screen is now removed and you can replace it!
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0
crwdns2947412:02crwdne2947412:0
Would the wheel be included with the LCD? The wheel on my camera is broken, and I would like to fix/replace it, so should I just order a new LCD screen?
The replacement includes just the compatible LDC screen and the connector; the wheel is a separate piece.
The LCD comes naked, meaning that the fancy screen protector with black frame is not provided. It is kind of a sticker which shall be detached from the original LCD and re-attached to the new one. It would have been a good idea to include it within the fix tip.