crwdns2915892:0crwdne2915892:0
This guide shows how to replace the camera's screen if damaged.
crwdns2942213:0crwdne2942213:0
-
-
Slide the gray switch from lock to open position.
-
-
-
Pull down on the blue tab to release the battery.
-
-
-
Use a PH00 screwdriver to remove the five 3.5 mm screws.
-
Use a PH00 screwdriver to remove the two 2.5 mm screws.
-
-
-
-
Pry apart the case gently using a plastic opening tool.
-
-
-
Pry back the panel to the right of the screen using a plastic opening tool.
-
-
-
Working on the left side of the screen, pry the metal panel off from the motherboard housing using a plastic opening tool.
-
-
-
Pull out the ZIF cable from the motherboard.
-
-
-
Lift the LCD screen from it's metal housing.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0