crwdns2915892:0crwdne2915892:0
This guide shows how to replace the lens assembly that may not be working properly.
crwdns2942213:0crwdne2942213:0
-
-
Slide the gray switch from lock to open position.
-
-
-
Pull down on the blue tab to release the battery.
-
-
-
Use a PH00 screwdriver to remove the five 3.5 mm screws.
-
Use a PH00 screwdriver to remove the two 2.5 mm screws.
-
-
-
-
Pry apart the case gently using a plastic opening tool.
-
-
-
Pry back the panel to the right of the screen using a plastic opening tool.
-
-
-
Working on the left side of the screen, pry the metal panel off from the motherboard housing using a plastic opening tool.
-
-
-
Pull out the ZIF cable from the motherboard.
-
-
-
Unpin the ZIF cable by lifting the cable towards the top of the camera while pulling up towards yourself.
-
Pull the ZIF cable out.
-
-
-
Lift the lens out of the case.
-
Pull out the ZIF cable.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
IUPUI, Team S6-G3, Baechle Spring 2018 crwdns2935289:0IUPUI, Team S6-G3, Baechle Spring 2018crwdne2935289:0
IUPUI-BAECHLE-S18S6G3
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
