crwdns2915892:0crwdne2915892:0
This guide will teach the user how to disassemble and access the AV port for replacement or installation.
crwdns2942213:0crwdne2942213:0
-
-
The battery cover is located on the right side of the camera.
-
Slide the cover to expose the battery.
-
-
-
Ensure that the battery lines up properly with the slot in the camera.
-
Slide battery in.
-
Slide cover closed.
-
-
-
This is the camera without the front cover.
-
-
-
Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.
-
-
-
Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.
-
-
-
Pull apart the inner hardware from the back case by prying on the left side.
-
-
-
-
The back cover is now removed from the internal hardware.
-
-
-
Use plastic opening tool pop open the two ribbons attaching to the CCD module.
-
These are the two ribbons.
-
-
-
The CCD module is now removed from the camera.
-
-
-
These two screws hold in the AV port.
-
Use Phillips screwdriver to remove screws.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.