crwdns2942213:0crwdne2942213:0
-
-
Slide the battery latch down the side of the camera with your hands.
-
The latch will automatically pop open.
-
-
-
Unlatch the clip over the battery.
-
The battery will partially pop out.
-
-
-
-
Remove the four 3.0mm Phillips #000 screws on the top of the camera with the phillips screwdriver.
-
Remove the additional four 3.0mm Phillips #000 screws on the bottom of the camera.
-
-
-
Once the screws are removed, slowly remove the back casing from the rest of the camera.
-
-
-
Then, pull the front case away from the rest of the camera.
-
-
-
After the casing is removed, the camera should look as shown.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0