crwdns2915892:0crwdne2915892:0
In this guide, the camera will be disassembled and the button board will be removed and replaced. In order to reach this part of the camera, you have to disassemble the back panel.
crwdns2942213:0crwdne2942213:0
-
-
Slide the lock at the bottom of the camera to "Open".
-
-
-
Slide the blue clip up and away from the battery.
-
-
-
-
Remove the six 3.5mm Phillips #000 screws.
-
Rotate the lock away from the camera.
-
-
-
Pry the device open with the plastic opening tool.
-
-
-
Remove the two plastic spacers between the front and the back panels.
-
Carefully remove the back panel.
-
-
-
Gently release the button board from the clips.
-
-
-
Disconnect the no-fuss ribbon cable by gently pulling it out of the button board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0