crwdns2915892:0crwdne2915892:0
It's important to ensure the wrist strap of this camera is in working order to help prevent damage from falls onto hard or hazardous surfaces that can harm the device.
crwdns2942213:0crwdne2942213:0
-
-
Using your finger, slide the release catch to unlock the battery/memory card cover.
-
-
-
Push the battery eject lever to free the battery.
-
-
-
Using a Phillips #00 screwdriver, remove one black 2 2/5mm screw that is located next to the wrist band loop.
-
-
-
Using the plastic opening tool, separate the edge-casing from the rest of the camera.
-
-
-
-
Pull the edge-casing off of the camera.
-
-
-
Using a Phillips #00 screwdriver, remove one silver 3mm screw located on the front side of the camera.
-
Using a Phillips #00 screwdriver, remove one silver 5 2/5mm screw located on the front side of the camera
-
Using a Phillips #00 screwdriver, remove one black 2 1/2mm screw located on the front side of the camera.
-
-
-
Using a Phillips #00 screwdriver, remove one 2 1/2mm screw located near the wrist strap.
-
-
-
Using a Phillips #00 screwdriver remove one black 2 2/5mm screw near the tripod slot on the bottom of the casing.
-
-
-
Using a Phillips #00 screwdriver remove the two 2 2/5mm black screws from the side of the camera opposite of the wrist strap
-
-
-
Using the plastic opening tool, open the device's outer shell.
-
-
-
Remove the front casing of the device.
-
-
-
Using the plastic opening tool, remove the back casing of the device.
-
-
-
Using a Phillips #00 screwdriver , remove two silver 3mm screws from the side of the device.
-
-
-
Using your fingers, remove the silver wrist band holster from the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0