crwdns2915892:0crwdne2915892:0
We turn our devices on and off every single day, and as such, the buttons wear over time. This repair guide will focus on replacing the electrical components controlling the On/Off buttons.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.
-
-
-
Use a plastic opening tool to pry the cover open.
-
After the the cover is partly open as shown, remove the cover with your hands.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using your hand, or a pair of tweezers, remove the ZIF connector by gently pulling it out of the dock on the circuit board.
-
-
-
Use a plastic opening tool to loosen the back cover off the device.
-
Once the back cover is loose, remove it gently by hand.
-
-
-
Using a spudger, carefully remove the metal casing that is attached to the ZIF connector.
-
-
-
Unclip the two plastic buttons with the spudger tool.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.