crwdns2915892:0crwdne2915892:0
The lens release button is a component of the camera body, and is used to release the lens from the camera body. This button can become stuck, stopping one from removing or switching lenses.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the 4 silver 1.2 mm Phillips #000 screws along the front outer lens mount.
-
Detach the outer lens mount ring.
-
-
-
Using your fingers, pull out the first black spacer ring.
-
Repeat the previous step for the second silver spacer ring.
-
-
-
-
Unscrew the 2 silver 1.2 mm Phillips #000 screws on opposing sides in the lens ring area.
-
Using your fingers, easily pull off lens housing. This will complete the removal of the E-mount.
-
-
-
Find the lens release button.
-
The button should be easily removed by hand.
-
-
-
After removing the button, the spring underneath it is uncovered and can be replaced.
-
This completes the removal of the lens release button.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Eastern Washington University, Team 1-4, Matresse Fall 2015 crwdns2935289:0Eastern Washington University, Team 1-4, Matresse Fall 2015crwdne2935289:0
EWU-MATRESSE-F15S1G4
crwdns2931471:04crwdne2931471:0
crwdns2935297:012crwdne2935297:0
crwdns2917034:0crwdne2917034:0
What to do if the lens is attached to the camera and the release button is stuck?
on a Nikon d7100.
