crwdns2942213:0crwdne2942213:0
- 
   
   - 
                     
            Remove the two screws on the bottom of the camera. 
- 
                     
            Remove the screw inside the battery door. 
- 
                     
            Once these are removed, slide the door out, and the small piece of plastic with the door. 
 
- 
                     
            
- 
                     
                                                
- 
   
   - 
                     
            Grab the lens and pull the body out of the plastic, this will reveal the insides of the device. 
- 
                     
            You'll see a screw on the top of the device, towards the front, remove this screw. 
- 
                     
            Pull the tabs on the bottom and top of the lens, and pull outward, this will remove the lens housing from the body. 
 
- 
                     
            
- 
   
   - 
                     
            Remove the screws connected to the silver metal plate. 
- 
                     
            Remove the plate by pulling the back up and pushing it towards the front. 
- 
                     
            Remove the screw directly above the LCD display. 
- 
                     
            Disconnect the cable going to the LCD display. 
 
- 
                     
            
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
