crwdns2915892:0crwdne2915892:0
This guide is for the replacement of the control panel and microphones for the Sonos One.
crwdns2942213:0crwdne2942213:0
-
-
Disconnect all power cords.
-
Remove the rubber foot and plastic screw guard on the bottom of the device using a plastic opening tool.
-
Note: the rubber foot and plastic screw guard can be removed as one piece to make reassembly easier
-
-
-
Remove the four 10mm Torx T10 screws from the bottom of the speaker.
More specifics on the four 10mm Torx T10 screws at the bottom, step 2.
ex: M3
Thanks
-
-
-
Remove the bottom cover by squeezing the protective cover slightly while pushing up with your fingers.
-
-
-
-
Remove the single 8mm Torx T10 screw and protective cover clip.
-
-
-
Slide the protective cover upwards to remove.
-
-
-
Remove the four 9mm Torx T8 screws from around the perimeter of the control panel.
-
-
-
With the front of the unit facing you, lift the control panel up using your thumbs.
-
-
-
Use a spudger to flip up the retaining flap on the control panel ribbon cable ZIF socket.
-
Pull the control panel ribbon cable out of its socket.
-
-
-
Pull the control panel away from the speaker to separate.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2947410:01crwdne2947410:0
where can I buy a replacement control panel?