crwdns2942213:0crwdne2942213:0
-
-
Push the brass bar, located in the top of the device, out of the carbonating block.
-
-
-
Slide the yellow battery cover up and away to remove it from the device.
-
-
-
Unhook the bottom piece of the plastic arm on each side of the device.
-
-
-
Lift the top of the plastic arm with the spudger and remove it on both sides.
-
-
-
Remove the plastic piece, located near the front of the carbonating block, from both sides of the device using a plastic opening tool or nylon spudger.
-
-
-
-
Remove the plastic oval and the spring within it.
-
-
-
Pull the loader tab cover down and away from the rest of the carbonating block.
-
-
-
Remove the three 17.9 mm screws located on the right side.
-
-
-
Unhook the four clips on the top of the carbonating block and remove the plastic cover.
-
-
-
Lift the clips located on both sides with the plastic spudger. Slide the front cover off.
-
-
-
Unhook the silver spring arms on both sides of the device by pushing down.
-
-
-
Grip the right and left sides of the device and pull it into two identical halves.
-
-
-
Pull the foam pad up and remove it from the front side of the carbonation component.
-
-
-
Remove the six 17.7 mm screws from the underside of the loader tab piece.
-
-
-
Pull the loader tab out of the nozzle.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team S1-G4, Leahy Spring 2017 crwdns2935289:0USF Tampa, Team S1-G4, Leahy Spring 2017crwdne2935289:0
USFT-LEAHY-S17S1G4
crwdns2931471:03crwdne2931471:0
crwdns2935297:041crwdne2935297:0
crwdns2947412:02crwdne2947412:0
Bonjour j'ai une pièce à l'intérieur dont je ne retrouve pas du tout la position au remontage.
Pouvez vous m'aider ?
De quelle partie s'agit-il, peux-tu prendre une photo ?
