crwdns2915892:0crwdne2915892:0
If your Singing Machine Shine Duets audio or power jacks are not functioning, use this guide as a means to replace it. If any parts which are removed in this guide have glue on them, use a metal scraping device to remove it. For our purposes, tweezers were sufficient.
crwdns2942213:0crwdne2942213:0
-
-
Remove the 10 mm screws on either side of the machine using a Phillips #1 screwdriver.
-
-
-
Remove the three 8 mm screws with a Phillips #0 screwdriver.
-
-
-
Use the opening tool or your hands to carefully pry open the now-loosened top panel.
-
-
-
The motherboard is located right behind the control buttons.
-
-
-
Remove the two screws holding the LED board in place.
-
-
-
-
Remove both LED boards from their pins.
-
-
-
Detach the white cable from its connector on the motherboard.
-
-
-
Carefully disconnect this red-and-black wire from the motherboard.
-
-
-
Remove the thicker red-and-black wire from its socket on the motherboard.
-
-
-
Disconnect the red port on the board which holds all of the external plugs
-
Disconnect the white wires from the board.
-
-
-
Remove eleven 8 mm screws from the motherboard with a Phillips #0 screwdriver.
-
-
-
Remove the motherboard from the shell.
-
-
-
Remove both screws from the board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.