crwdns2915892:0crwdne2915892:0
This guide will show you how to replace the brushroll of the Shark Matrix RV2310. This replacement may be used to solve issues with the vacuum collecting debris. It is a fairly easy process, though it is important to ensure that the battery is removed first so that the vacuum is off during this process.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 11 mm Phillips screws holding the battery plate in place.
-
Remove the battery plate.
-
-
-
Remove the battery from the compartment.
-
Disconnect the electrical cable connection from the battery to the robot.
-
-
-
-
Remove the three 8 mm Phillips screws from the plastic plate holding the brushroll in.
-
-
-
Press in the two tabs on the side of the plate and pull upward to remove it.
-
-
-
Pull up on the darker orange side of the brushroll to remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.