crwdns2915892:0crwdne2915892:0
This guide will show you how to take apart the fan to remove the Printed Circuit Board.
crwdns2942213:0crwdne2942213:0
- 
   
   - 
                     
            Use the Phillips #2 screwdriver to remove the four 6 mm screws by unscrewing counterclockwise. 
 
- 
                     
            
- 
   
   - 
                     
            Remove the Phillips 6 mm screw that holds the circuit board to the outer shell of the fan. 
 
- 
                     
            
- 
   
   - 
                     
            Remove the top cover containing the circuit board and the wires by pulling it away from the outer shell of the fan. 
 
- 
                     
            
- 
   
   - 
                     
            Remove the screws from the four corners of the circuit board. 
- 
                     
            Remove the circuit board from the top cover. 
 
- 
                     
            
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
