crwdns2942213:0crwdne2942213:0
-
-
Begin with unscrewing the seven outer screws on the camera. There is one on each corner and then three at the bottom.
-
-
-
Now carefully pry open the back casing with the ifixit plastic opening tool.
-
-
-
When the back casing is off, gently move the LCD screen to the side.
-
And then remove the three inner screws to remove the inside case.
-
-
-
-
Unclip the four connectors that hold down the orange copper film strips.
-
Then carefully pull out the three film strips with the ifixit plastic opening tool.
-
-
-
Remove the screw located above the center film strip. This holds the top frame in place.
-
-
-
Unclip the four connectors to release the film strips.
-
-
-
Next unclamp the connector to release the film strip and then you can replace your LCD screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
3 Tech Girls crwdns2935289:03 Tech Girlscrwdne2935289:0
Community
crwdns2931471:02crwdne2931471:0
crwdns2935297:04crwdne2935297:0
