crwdns2942213:0crwdne2942213:0
-
-
Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.
-
-
-
Remove the screw on each side of the device using a Phillips head screwdriver.
-
-
-
Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws.
-
Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.
-
-
-
Once the back cover has been removed the battery will be visible.
-
Pry the battery from the device.
-
-
-
-
Unplug the battery connecting cables.
-
-
-
Once the battery has been removed you can see the motherboard.
-
Unscrew 4 screws on the metal docket using a Phillips head screw driver.
-
The USB connector can now be taken off of the device.
-
-
-
Using the philips screwdriver, remove the two screws on the mother board.
-
-
-
Place the pry tool in-between the front cover and mother board.
-
Gently separate the front cover.
-
-
-
After opening the front cover you will see and electric ribbon connecting the buttons to the mother board.
-
-
-
Carefully flip up the plastic lip that holds the electric ribbon to the board.
-
-
-
Remove the 3 screws located around the motherboard. 2 screws are located on the left side and1 screw is located on the right side.
-
-
-
The motherboard should be loose from the middle casing.
-
Gently pull the motherboard away from the middle casing
-
The device should now be in multiple parts.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Clemson, Team 14-8, Benson Fall 2013 crwdns2935289:0Clemson, Team 14-8, Benson Fall 2013crwdne2935289:0
CLEM-BENSON-F13S14G8
crwdns2931471:03crwdne2931471:0
crwdns2935297:07crwdne2935297:0
