crwdns2915892:0crwdne2915892:0
This guide contains photos that do not include pictures of the back cover or battery. However, the instructions have been adjusted to reflect this lack of visual aid.
crwdns2942213:0crwdne2942213:0
-
-
Flip the phone over and take off the back cover
-
-
-
Use button to remove battery from the phone.
-
-
-
Locate SIM card
-
Slide SIM card down and gently pull out of the card slot
-
-
crwdns2935267:0crwdne2935267:0Magnetic Project Mat$19.95
-
Locate the six (4mm) screws on the back casing of the phone.
-
Unscrew each one using a phillips head #000 screwdriver.
-
Place screws on magnetic mat.
-
-
-
Starting at the top of the phone, carefully insert plastic opening device into the seam.
-
Carefully slide device along the seam and around the corners of the phone until the back is separated from the front.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Locate the connection point of black wire running from the microphone to the motherboard.
-
Carefully disconnect the gold connector from the motherboard using tweezers.
-
-
-
Locate the red connector at the top of the motherboard.
-
Carefully lift and remove the connector from the motherboard using tweezers.
-
-
-
Locate the gold connector that connects the screen to the motherboard.
-
Carefully disconnect the connector from the motherboard using tweezers.
-
-
-
Start at the bottom of the motherboard and gently pry it from the back of the cell phone using the plastic opening tool.
-
Lift the motherboard from the cell phone.
-
-
-
Remove the motherboard from the cell phone.
-
-
-
Locate the two black, rubber tabs near the top of the back of the phone.
-
Locate the one black, rubber tab near the base of the phone.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using tweezers, pry each of the tabs open.
-
Tuck each tab behind the white notch.
-
-
-
Flip phone over to make the keypad visable.
-
Carefully lift keypad around the edges.
-
Remove keypad from the cell phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.