crwdns2915892:0crwdne2915892:0
The screen may become broken over time. This guide will assist in the replacement of the screen.
crwdns2942213:0crwdne2942213:0
-
-
Slide the latch on the back of the phone up.
-
-
-
After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.
-
-
-
Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.
-
-
-
With a #0 Phillips screwdriver remove the screw which you just uncovered.
-
-
-
-
Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open.
-
Then disconnect the small power connector near the top of the phone.
-
-
-
Gently pry up the ribbon-type connector with the spudger.
-
-
-
Carefully pry the logic board from the case with the spudger.
-
-
-
Once the logic board has been removed, peel the keypad up.
-
-
-
When using a spudger the keypad housing comes off quite easily, although it may be necessary to guide the ribbon cable through the slot in the housing.
-
-
-
Remove screws with #0 Phillips screwdriver.
-
-
-
Carefully pry apart the casing with the spudger tool.
-
-
-
Use the spudger to carefully pry off the speaker.
-
-
-
Carefully pry off the ringer with the spudger.
-
-
-
Carefully pry off the screen with the spudger.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 34-59, Forte Spring 2010 crwdns2935289:0Cal Poly, Team 34-59, Forte Spring 2010crwdne2935289:0
CPSU-FORTE-S10S34G59
crwdns2931471:04crwdne2931471:0
crwdns2935297:014crwdne2935297:0
