crwdns2915892:0crwdne2915892:0
The lens of a camcorder is one of the most important components of the device. However, the lens is also susceptible to cracking and becoming dirty. A dirty/cracked lens may affect the outcome of the photographed results, so a replacement may be in order.
When the lens of a Samsung camcorder are damaged or non-functional, it would need to be replaced. This guide will show you how to remove the lens in your camcorder.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the eight 4mm screws using the Phillips #000 screwdriver.
-
-
-
Unplug the cord connecting the LCD section of the device.
-
Remove the left face of the device.
-
Remove the top face by removing the three 4mm screws using a Phillips #000 screwdriver.
-
-
-
-
After removing the body of the device, unscrew the two 3.5mm Phillips #000 screws holding the battery compartment in place.
-
Remove the battery compartment.
-
-
-
Remove the lens assembly from the device.
-
-
-
Remove the three 3.5mm Phillips #000 screws on the metal part from the lens component.
-
Remove the motherboard from the lens.
-
Remove the lens from the lens assembly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Embry-Riddle Aeronautical University, Team S15-G1, Lamothe Fall 2019 crwdns2935289:0Embry-Riddle Aeronautical University, Team S15-G1, Lamothe Fall 2019crwdne2935289:0
ERAU-LAMOTHE-F19S15G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:04crwdne2935297:0
