crwdns2915892:0crwdne2915892:0
This guide will provide a step-by-step procedure for replacing the camera in your Samsung Rogue.
crwdns2942213:0crwdne2942213:0
-
-
With your thumbs, push down on the back cover of your phone and slide it away from the camera.
-
-
-
You can now remove the battery by prying it up with your finger.
-
-
-
Use a plastic opening tool to carefully pry the back cover surrounding the camera up from the phone.
-
-
-
Remove the five 3.4mm Philips screws securing the backing of the phone.
-
-
-
-
Use a plastic opening tool to carefully pry off the back cover.
-
-
-
Remove the two 3.45 mm Philips screws below the white sticker.
-
-
-
Carefully lift the motherboard up from the bottom edge.
-
-
-
Use a plastic opening tool to disconnect the film from the motherboard.
-
-
-
On the underside of the motherboard, remove the single 3.3mm Philips screw.
-
-
-
Use a plastic opening tool to pop off the edges of the speaker/antenna piece from the motherboard.
-
Turn over the motherboard and carefully lift the speaker/antenna piece straight up.
-
-
-
With two fingers carefully detach the camera from the motherboard by lifting straight up.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 7-32, Maness Spring 2012 crwdns2935289:0Cal Poly, Team 7-32, Maness Spring 2012crwdne2935289:0
CPSU-MANESS-S12S7G32
crwdns2931471:04crwdne2931471:0
crwdns2935297:016crwdne2935297:0
