crwdns2915892:0crwdne2915892:0
Prereq guide to remove the refrigerator evaporator cover.
crwdns2942213:0crwdne2942213:0
-
-
Unplug your refrigerator before you begin your repair.
-
-
-
Open both French doors for the refrigerator compartment.
-
-
-
Remove all the loose shelves and bins from the refrigerator compartment.
-
-
-
-
Press both plastic tabs firmly with your fingers and lift upward to unclip the bottom shelf.
-
Remove the bottom shelf.
-
-
-
Use a flathead screwdriver to pry and remove the top screw cover on the evaporator cover.
-
-
-
Use a Phillips screwdriver to remove the four screws securing the evaporator cover:
-
Two 37 mm-long screws
-
Two 16.5 mm-long screws
-
-
-
Grasp the right edge of the evaporator cover with your hands and swing it outwards toward you.
-
Don't try to fully remove the cover in this step, as it's connected by several wires.
-
-
-
Squeeze and disconnect the two wire connectors connecting the evaporator cover to the refrigerator.
-
-
-
Pull the evaporator cover towards you and remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
