crwdns2915892:0crwdne2915892:0
In this guide you will learn how to remove the entire back side of the laptop in order to access and replace a damaged or broken internal fan.
crwdns2942213:0crwdne2942213:0
-
-
Begin with the laptop lying to its back revealing its underside.
-
Locate the two latches on the bottom of the laptop. Slide the latches inward until a faint click is heard.
-
-
-
Completely remove the battery from the laptop.
-
-
-
Unscrew the 4mm screw, and slide the cover off away from the computer to reveal the housing for the hard drive and RAM boards.
-
-
-
Locate the gray hard drive cover, and remove the four corner 3.5mm screws.
-
-
-
Lift the hard drive cover by pulling upwards on the removal handle.
-
You can now remove the hard drive from the laptops housing freeing up space to replace your damaged or broken hard drive with a new hard drive.
-
-
-
Remove the grip pad at the top right corner of the laptop using a Phillips screwdriver. Pop the grip pad from its place to reveal a 4 mm screw.
-
Remove all seventeen 4 mm screws.
-
-
-
Use an opening tool to pop the back panel of the laptop off. Start at the corners and slide the opening tool along the edges of the laptop.
-
-
-
Remove the back panel.
-
Remove the two 4 mm screws holding the fan in place.
-
-
-
Unclip the white cable connecting the fan to the motherboard.
-
Carefully remove the fan from the laptop.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0