crwdns2915892:0crwdne2915892:0
Cracked or faulty LCD screens can make the HMX-F90 difficult to use. This guide can be used to replace the flip-out LCD screen.
crwdns2942213:0crwdne2942213:0
-
-
Rotate the camcorder so that back is facing you. Then flip open the LCD screen.
-
Locate and remove the 4.5mm Phillips #00 screws in the LCD screen base.
-
-
-
Close the LCD screen. Then lift the silver base away from the camcorder.
-
-
-
-
Rotate the camcorder so that it is facing you.
-
Locate and remove the two 4.5mm Phillips #00 screws.
-
-
-
Open the LCD screen and rotate it around 90 degrees.
-
Locate the small prying notch and use a prying tool to slowly remove the LCD cover.
-
-
-
Locate and remove the two 3.5mm Phillips #00 screws holding the back cover.
-
-
-
With tweezers gently unclip the silver tab holding the ribbon wire.
-
Gradually feed the ribbon wire through the hole to remove the screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
USF Tampa, Team S13-G1, Boczar Fall 2017 crwdns2935289:0USF Tampa, Team S13-G1, Boczar Fall 2017crwdne2935289:0
USFT-BOCZAR-F17S13G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:012crwdne2935297:0
