crwdns2915892:0crwdne2915892:0
Use this guide to remove the motherboard from the Samsung Gear 360. You will have to complete a full tear-down of the device to get to the motherboard, so follow the directions carefully and take your time to ensure you complete every step correctly.
crwdns2942213:0crwdne2942213:0
-
-
Twist silver ring on the lens counter-clockwise with force to remove it.
-
-
-
Insert a small flathead screwdriver into marked slot on camera lens and pry off camera lens cover.
-
-
-
Using a PH00 screwdriver head, remove all Phillips #00 0.75 mm screws on the front of the camera.
-
Repeat for the back side of the camera.
-
-
-
Peel off the black rubber located on the bottom of the device using your hand or a small flathead screwdriver.
-
-
-
Once the black rubber has been removed, unscrew all Phillips #00 0.75 mm screws on the bottom of the device using a PH00 screwdriver head.
-
-
-
Using a plastic opening tool, pry the tripod mount off the device.
-
-
-
-
Using both hands, carefully remove the right cover off the camera body.
-
-
-
To remove the left cover of the camera body, lift the left cover using a small flathead screwdriver and pull it off.
-
-
-
Once the camera body has been removed, lift and pull off the metal support ring using a small flathead screwdriver.
-
Repeat for both sides of the camera.
-
-
-
Remove all Phillips #00 0.75 mm screws from the body of the camera using a PH00 screwdriver head.
-
-
-
Carefully lift the three sensors off using a plastic opening tool and pull them aside.
-
-
-
Carefully use a plastic opening tool to separate the gray case from the black case on the device.
-
-
-
Insert a plastic removal tool underneath the four sensors on the motherboard to fully separate the camera case.
-
-
-
Use a plastic opening tool to disconnect the sensors from the motherboard to free it.
-
-
-
Using a PH000 Screwdriver head, unscrew the Phillips #000 0.5 mm screw connected to the motherboard.
-
-
-
To remove the motherboard from the device, use a plastic opening tool on the edges and lift up.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team S3-G5, Sullivan Spring 2017 crwdns2935289:0USF Tampa, Team S3-G5, Sullivan Spring 2017crwdne2935289:0
USFT-SULLIVAN-S17S3G5
crwdns2931471:04crwdne2931471:0
crwdns2935297:014crwdne2935297:0
crwdns2947410:01crwdne2947410:0
What is the part number of the motherboard? Mine is stuck in firmware upgrade state and Samsung won't even look at it.
So maybe a motherboard replacement is the easiest answer.
Thanks
