crwdns2915892:0crwdne2915892:0
If your headphones aren’t properly working with your device, you may need to replace the headphone jack in it. Use this guide to replace the headphone jack in your tablet.
crwdns2942213:0crwdne2942213:0
-
-
Place the plastic opening tool into the SD card slot or charge port.
-
Try in an upward motion until you see a separation between the tablet and back cover.
-
-
-
Work around the entire device by sliding the plastic opening tool around the rim.
-
-
-
Remove the back cover once all links have been separated.
-
-
-
-
Place the plastic opening tool in between the outer rim.
-
Move the tool in a downward motion to separate the 2 parts.
-
Run the tool along the rim to disconnect all connectors holding the outer rim to the back of the device.
-
-
-
Repeat this step for all four sides, then remove the rim.
-
-
-
Using the Phillips #00 screwdriver, remove the two screws holding the headphone jack.
-
-
-
Place the hook of a spudger on the backside of headphone jack and pop the headphone jack out.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0