crwdns2894164:0crwdne2894164:0

crwdns2892376:0crwdne2892376:0

To replace other parts inside your Samsung Galaxy Tab A 10.1, you must first open up the device through the back. This guide will show you how to remove the back panel of the device.

crwdns2860947:0crwdne2860947:0

  1. Have the front of the device facing you. Begin near one of the curved edges of the device (see photo two for visual example).
    • Have the front of the device facing you.

    • Begin near one of the curved edges of the device (see photo two for visual example).

    • Place a plastic opening tool between the front and back panels.

    • If a plastic opening tool doesn’t work, using a metal spudger may work, but it may damage the plastic on the device.

    • Remember to remove the micro SD card (if present) before you begin.

    AWESOME!! I was trying to open it from the “NOT OK” place and you saved me to broken the screen… thanks!!

    David Leiva - crwdns2853112:0crwdne2853112:0

    No problem, enjoy.

    Roger L. Ortiz -

    Felt it was easier for me to do it from the middles out.

    Tanin Garcia - crwdns2853112:0crwdne2853112:0

    Well then you are messing up the digitizer part, which sucks to replace on your own because it will never be stable again, ghost touches with fake digitizer with fake 3m double sided tape that doesn’t stick..

    Roger L. Ortiz -

    Important: the display is sourrounded with a plastic frame. You need to get beween this frame an the backcover (not directly at glass edge as I tried it first and almost broke the glass). Get a closeup picture of it to clarify.

    Oliver Dawid - crwdns2853112:0crwdne2853112:0

    wer lesen kann, ist klar im Vorteil - ich hab die SD-Karte drin gelassen. Hat aber funktioniert…

    Thomas Wolter - crwdns2853112:0crwdne2853112:0

    Don’t use a very small flathead screwdriver as a spudger. Just shattered the screen :(

    nikvoss - crwdns2853112:0crwdne2853112:0

  2. Once the plastic opening tool is fully inserted, wedge it around the device’s edges to separate the panels. Lift the back panel off of the device.
    • Once the plastic opening tool is fully inserted, wedge it around the device’s edges to separate the panels.

    • Lift the back panel off of the device.

    • The back panel will make a clicking noise while being lifted off of the device.

crwdns2892372:0crwdne2892372:0

To reassemble your device, follow these instructions in reverse order.

crwdns2878426:08crwdne2878426:0

Isabella Li

crwdns2886885:002/10/2017crwdne2886885:0

2.150 crwdns2894548:0crwdne2894548:0

crwdns2886889:07crwdne2886889:0

crwdns2892814:0crwdne2892814:0

Cal Poly, Team S15-G6, Livingston Fall 2017 crwdns2886886:0Cal Poly, Team S15-G6, Livingston Fall 2017crwdne2886886:0

CPSU-LIVINGSTON-F17S15G6

crwdns2858115:04crwdne2858115:0

crwdns2886889:026crwdne2886889:0

crwdns2892922:0crwdne2892922:0

Why need to remove cables when only the back has to be replaced ?

nabe_03 - crwdns2853112:0crwdne2853112:0

crwdns2892926:0crwdne2892926:0

crwdns2894754:0crwdne2894754:0:

crwdns2894766:024crwdne2894766:0 2

crwdns2894768:07crwdne2894768:0 21

crwdns2894768:030crwdne2894768:0 122

crwdns2894770:0crwdne2894770:0 8,885