crwdns2915892:0crwdne2915892:0
This guide will walk you through the process of replacing distorted or broken speakers on a Samsung Galaxy Tab 8.9.
crwdns2942213:0crwdne2942213:0
-
-
Insert a plastic opening tool between the back cover and screen of the Samsung Galaxy Tab 8.9 (as indicated in the photograph).
-
-
-
Insert a second plastic opening tool 6 cm (~2.4 inches) away from the first tool.
-
-
-
Slide the second plastic opening tool along the edge of the device to separate the back cover.
-
-
-
Using your hands, remove the back cover.
-
-
-
-
Using tweezers, peel away the green tape located on top of the two flexible ribbon cables.
-
-
-
Insert a spudger under the orange tab.
-
Pry open the tab to disconnect the black flexible ribbon cable from the motherboard.
-
-
-
Slide out the yellow flexible ribbon cable to disconnect it from the motherboard.
-
-
-
Using a Phillips #00 screwdriver, unscrew the 4 screws (3mm) that are holding the charger port and speaker support.
-
-
-
Insert opening tool to pry support from the housing.
-
-
-
Desolder the two connections to separate the speakers from the charger port.
-
-
-
Separate charging port from speaker assembly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.