crwdns2915892:0crwdne2915892:0
If your camera stops working or there are constant smudges or discoloration spots in your pictures, your camera lens may be broken or malfunctioning. Replace it by following these steps.
crwdns2942213:0crwdne2942213:0
-
-
Locate the small slit on the bottom edge of the device between the back and front cases.
-
Pop the back case off by inserting your finger and pulling the case away from the phone.
-
-
-
Remove the battery by pushing the bottom edge of the battery up and away from the phone
-
-
-
Remove SIM card by pushing down and away from the slot, then pulling it out toward the bottom edge of the phone.
-
-
-
-
Remove the seven 4.5 mm Phillips #00 screws along the perimeter of the phone.
-
-
-
Staring near the power button, use a plastic opening tool to disengage the plastic clips securing the midframe.
-
-
-
Disconnect the ribbon cable and camera lens by tugging gently at the base of the ribbon cable either by pinching with fingers or with the Tweezers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 18-37, Regan Winter 2013 crwdns2935289:0Cal Poly, Team 18-37, Regan Winter 2013crwdne2935289:0
CPSU-REGAN-W13S18G37
crwdns2931471:04crwdne2931471:0
crwdns2935297:08crwdne2935297:0
