crwdns2915892:0crwdne2915892:0
Camera Replacement guide for a Samsung Galaxy J3 Emerge Model SM-J327P. Front and back cameras may need replacement if they are cracked. Each camera is found behind the motherboard. You will need time to open the motherboard before replacing the cameras.
crwdns2942213:0crwdne2942213:0
-
-
Heat up the edges of the screen with a hair dryer.
-
Put the iFixit Opening Tool between the screen and body to open the edge of the screen up.
-
Work the iFixit Opening Tools around the whole screen to break the glue.
-
-
-
Lift the screen up from the bottom.
-
Pry the gray cover open.
-
-
-
Pry the connector off of the motherboard by using a clean nail or the iFixit opening tool.
-
-
-
Remove the eleven Phillips #00 3.5mm screws.
-
-
-
-
Turn the phone over and push down where the battery was.
-
-
-
Insert the iFixit Opening Pick between the motherboard and the panel.
-
Work the iFixit Opening Pick around the outside of the motherboard.
-
-
-
Pry the motherboard away from the phone using your hand.
-
-
-
Pull the green tape over the connectors off.
-
-
-
Lift up the tabs to reveal the ribbons.
-
-
-
Pull the two camera ribbons away from the connectors.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.