crwdns2942213:0crwdne2942213:0
-
-
Make sure that the phone is turned off. Then use your thumb nail or a plastic spudger to pry open the back cover.
-
-
-
Use your thumb nail or the plastic opening tool to lift the battery out of the device.
-
-
-
Remove the five 4 mm screws with a Phillips#00 screwdriver
-
-
-
-
Use the plastic opening tool to pry into the bezel to separate the mid-frame from the device
-
-
-
Use the Phillips#00 screwdriver to remove the five black screws.
-
Use the plastic opening tool to lift the two ribbons.
-
Remove the metal internal cover to expose the motherboard.
-
-
-
Use the plastic opening tool to lift the motherboard out of the device.
-
-
-
Once you have removed the motherboard you will have access to the LCD screen.
-
Use the plastic opening tool to remove the damaged LCD screen from the display assembly.
-
Put the new LCD screen in place and reassemble the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0