crwdns2915892:0crwdne2915892:0
Samsung Galaxy A51 - how to disassemble the device and change broken screen
crwdns2942213:0crwdne2942213:0
crwdns2936621:0crwdne2936621:0
-
-
Samsung Galaxy A51 - the new spare part.
-
-
-
Warm up the device to soften the adhesive.
-
Use suction cup and plastic tools (playing cards) to separate the back cover.
-
-
-
Remove the SIM Tray.
-
Remove 13x Phillips screws.
-
-
-
-
Only use plastic tools to separate the metal frame.
Carefui not to insert the tool between the wrong layers, there's a frame that must stay attached to the screen
-
-
-
Test the new spare part.
-
-
-
Disconnect and remove the main flex cable.
-
To remove the fingerprint sensor - remove two Philips screws and disconnect the flex cable.
-
Disconnect coaxial antenna cable.
-
-
-
Remove the Sub -board? Charging board.
-
The motherboard is secured by one small black screw, remove it to separate the board.
-
Don't forget to transfer the receiver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:016crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Master Techs crwdns2935289:0Master Techscrwdne2935289:0
Community
crwdns2931471:0327crwdne2931471:0
crwdns2935297:01.673crwdne2935297:0
crwdns2947410:01crwdne2947410:0
Hallo, i made repleacment, display went well ( touch and functions, but after turning on the display was like in shadow and side lines were on white kind a yellow fade, what it could be? is it by bad replacement, display or something else?
