crwdns2937539:0crwdnd2937539:0crwdne2937539:0
crwdns2915892:0crwdne2915892:0
Use this guide to replace the midframe in your Samsung Galaxy A50.
crwdns2942213:0crwdne2942213:0
-
-
Insert a SIM card eject tool, a SIM eject bit or a straightened paper clip into the hole on the SIM tray located at the left side of the phone.
-
Press firmly to eject the tray.
-
Remove the SIM card tray.
-
-
-
Start by switching off your phone.
-
Heat an iOpener and apply it to the back cover to soften the adhesive.
-
-
-
Insert an opening pick at the bottom of your phone near the USB-C port.
-
Slide the opening pick to the bottom left corner.
-
-
-
Insert a second opening pick and slide it from the bottom to the top left corner to cut the adhesive.
-
Leave the opening picks in place to prevent the adhesive from resealing.
-
-
-
Insert a third opening pick under the top left corner of the back cover.
-
Slide the opening pick along the top edge of the phone.
-
Leave the opening pick in the top right corner to prevent the adhesive from resealing.
-
-
-
-
Insert a fourth opening pick under the top right corner of the back cover.
-
Slide the tip of the opening pick along the side of the phone to the bottom right corner to cut the adhesive.
-
Leave the opening pick in the bottom right corner to prevent the adhesive from resealing.
-
-
-
Remove the 13 Phillips #00 screws (4 mm length).
-
-
-
Insert an opening pick between the display and the midframe at the bottom of your phone above the USB-C port.
-
Slide the pick along the bottom edge to release the clips.
-
-
-
Continue sliding the pick along the left edge of the phone to release the clips.
-
-
-
Slide the opening pick along the top edge.
-
-
-
Slide your opening pick along the right edge towards the bottom right corner.
-
-
-
Separate the midframe from the phone.
-