crwdns2915892:0crwdne2915892:0
This is a full screen replacement of the A22/A22 5g please be careful with the disassembly and assembly of the device as it has fragile components
crwdns2942213:0crwdne2942213:0
-
-
Firstly remove the Sim card .
-
start heating the back of the phone all around the edges of the back with an iOpener or aheat gun
-
start moving your pry card start around the edges of the phone to remove the adhesive it will take some time be patient and do it with care
-
mind the 2 cables in the middle of the phone don't damage them
-
-
-
When you open the back start taking of the screws of the top of the phone and bottom of the frame
-
Then with a pry card remove the inner plastic frame of the phone carefully go all around the phone to take off the frame
-
You should remove the wire connected from the frame to the phone
-
-
-
-
Remove the three ribbon cables for the screen and battery
-
Remove the speaker cover this will show the ribbon cable you will remove which is connected to the screen
make sure to transfer any components from the old screen housing to the new one. My replacement screen didnt have the power button flex. Failure to transfer this part will cause the phone to boot loop
-
-
-
Next remove your old screen with a iOpener or a heat gun and a pry cart go all round the edges to take of the old display
-
make sure you go all around the edges clean left out adhesive and make sure the front is properly clean
-
Place the ribbon cable inside the gap of the frame and assemble it
-
Place your new adhesive around the frame of the phone place your new screen on top of the frame
-
-
-
closed it up and use Clamp holders to press around the whole screen of the phone make sure it sticks in place
-
Then turn the phone around place the all the ribbon cables back in place make sure your new screen works
-
close the back cover with new adhesive use clamp Holders to help you completely seal it up
-
If you don't have clamp holders you can use ruber bands
Come faccio ad acquistare il display?Grazie mille in anticipo per la Vostra gentilezza
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:013crwdne2935229:0
crwdns2947412:05crwdne2947412:0
Thanks for the help
It is not Galaxy A22 5G device on the pics.
Samsung à 22
Baleme -
Adhesive missing in “Needed parts”
Which adhesive do you recommend to replace these screens
