crwdns2915892:0crwdne2915892:0
You will need to remove the Headphone Jack/Audio Output device in order to remove/install this component.
crwdns2942213:0crwdne2942213:0
-
-
To remove the back case of the Samsung Galaxy S, you may need a spudger.
-
Identify the slit which is at the bottom edge of the phone.
-
-
-
Insert the edge of the spudger into the slit and use it to pry the back case off of the phone.
-
-
-
Insert the spudger into the space between the battery and the phone and pry the battery out as you slide it along the underside the battery.
-
-
-
Use the screwdriver to unscrew each of the 6 silver screws holding the main case to the LCD touchscreen.
-
If the screws are stuck, use the spudger to pry them out.
-
-
-
-
Use the plastic opening tool to pry the main case from the LCD touchscreen.
-
Insert the thin edge of the plastic opening tool into the groove between the silver edge and black edge.
-
Run the tool all the way around the edge of the phone until you hear each of the clips detach.
-
-
-
Once the clips are detached, separate the main case from the LCD touchscreen.
-
-
-
Use the spudger to pry out the grey rubber rectangular component from the main case.
-
-
-
Use the spudger to pry along the groove between the speaker and the main case.
-
Once the speaker is unclipped it should pop out easily.
-
-
-
Using the plastic opening tool, you will need to detach the black square component which is boxed in blue.
-
Pry camera unit attached to it off the motherboard.
-
-
-
Using the plastic opening tool, detach the green square components attaching the Audio Output device to the motherboard.
-
Now use the screwdriver to unscrew the 2 black screws holding the Audio Output device to the motherboard.
-
-
-
Now that you have unscrewed the 2 black screws, the silver plate holding the device to the motherboard should come right off.
-
Next, gently pull the Audio Output device off of the LCD touchscreen. It is secured by some weak adhesive and should come off easily.
-
You are now free to install a new Headphone Jack/Audio Output device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 25-25, Garner Spring 2011 crwdns2935289:0Cal Poly, Team 25-25, Garner Spring 2011crwdne2935289:0
CPSU-GARNER-S11S25G25
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
crwdns2917034:0crwdne2917034:0
I have a sch-i500 with bad sound. I will record video and when I play back there is no sound only scratchy under water type noise. How would you replace the microphone in one of these phones?
