crwdns2915892:0crwdne2915892:0
You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's camera module.
crwdns2942213:0crwdne2942213:0
-
-
Remove the back battery cover.
-
-
-
Using the Phillips #00 screwdriver, remove the phone's battery.
-
-
-
Remove six (4.28 x 1.25)mm screws using the Phillips #00 screwdriver
-
-
-
-
Continuing to use the Phillips #00 screwdriver, gently pry the silver plastic back plate from the body of the phone.
-
-
-
Peel off the Identification sticker.
-
-
-
Peel the button sensor on the side of the motherboard off of the case.
-
-
-
Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.
-
-
-
You will now be able to replace the Camera component with a new part.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.