crwdns2915892:0crwdne2915892:0
This guide is a step-by-step guide on how to replace the Samsung Chromebook 3 XE500C13-K02US I/O board with integrated Wi-Fi card. You will need to remove the battery, disconnect the I/O board from the motherboard, remove the 2 pins speaker connecter, and the black and white wire running into the hinge cover
crwdns2942213:0crwdne2942213:0
-
-
Place the laptop back cover facing up to expose all nine 4.6 mm screws.
-
Remove all nine 4.6 mm screws using a Phillips #00 screwdriver.
-
-
-
Wedge a plastic opening tool underneath the cover of the laptop.
-
Once the tool is wedged between the cover and the body of the laptop, slide the tool around the edge of the laptop to disengage the retaining clips.
-
Remove the cover of the laptop to expose the inside components.
-
-
-
Use the Phillips #00 screwdriver to remove the three 4.6 mm screws from the silver bracket.
-
-
-
-
Remove the 4.6 mm screw from the I/O board.
-
-
-
Remove the wire connector from the I/O board.
-
-
-
Remove the black and white wires from the I/O board.
-
-
-
Lift the clip of the ribbon cable connector.
-
Remove the ribbon cable from the I/O board.
-
-
-
Lift and remove the I/O board from the base of the laptop
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
IUPUI, Team 3-3, Harley Spring 2023 crwdns2935289:0IUPUI, Team 3-3, Harley Spring 2023crwdne2935289:0
IUPUI-HARLEY-S23S3G3
crwdns2931471:04crwdne2931471:0
crwdns2935297:03crwdne2935297:0
