crwdns2915892:0crwdne2915892:0
This guide will open up the device and remove the disc tray.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips head #J1 screwdriver to remove all three (3) 10 mm screws.
-
-
-
To remove each ribbon cable, firmly grip the hard plastic tab attached to the base and pull upwards.
-
-
-
-
Using a screwdriver with a #J1 bit, remove the two (2) 7 mm screws.
-
-
-
Locate the two black tabs on each side of the disc tray. The second tab is located in the same location on opposite side of marked tab.
-
While pinching both tabs, slightly push the disc tray towards the front of the device, and lift the disc tray out.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.