crwdns2915892:0crwdne2915892:0
Replace the switch spring inside your Royal Kludge GK64 keyboard key using this guide. Mechanical keyboard switch springs may need to be replaced in a number of circumstances. The key switch springs may eventually appear worn out from constant use or they may cease working completely. Because the process is similar for many mechanical keyboard models, these steps may also be useful for other mechanical keyboard models.
crwdns2942213:0crwdne2942213:0
-
-
Use a keycap remover to pull your keycap up and off of the keyboard.
-
-
-
Use the switch puller to pull the desired switch out of your keyboard.
-
-
-
Place your switch onto your switch opener, and gently push down.
-
Make sure the switch is securely in place and continue to remove the top housing.
-
-
-
-
Use the stem holder to remove the stem, which will reveal the switch spring.
-
Remove the switch spring.
-
-
-
Align your new spring with the center of the bottom housing and gently place the switch spring.
-
-
-
To put the stem back, align the stem legs with the metal plate on the switch.
-
Remove the switch from the switch opener.
-
Gently push down onto the housing until you hear a click and both pieces are into place.
-
-
-
Align the pins located at the bottom of the switch to the corresponding pin holes in the keyboard.
-
Gently push the switch back into the keyboard.
-
-
-
Place the keycap back onto the switch and push down to secure the keycap.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
York University, Team A-7, Morris Fall 2022 crwdns2935289:0York University, Team A-7, Morris Fall 2022crwdne2935289:0
YORK-MORRIS-F22SAG7
crwdns2931471:03crwdne2931471:0
crwdns2935303:01crwdne2935303:0
