crwdns2915892:0crwdne2915892:0
If your Revlon One-Step Hair Dryer will not power on after multiple troubleshooting attempts, the plug may be defective. As a result, this guide will teach users how to properly replace the cord and plug.
crwdns2942213:0crwdne2942213:0
-
-
First, remove the pink panels on each side of the handle in order to access the screws.
-
-
-
After removing the pink panels, there will be one visible screw on each side of the dryer handle measuring at 11mm.
-
Carefully unscrew both of these screws with a tri-point Y000 screwdriver.
-
Next, completely remove the screws out of the dryer handle.
-
-
-
Remove the barrel by twisting and pulling it away from the handle of the dryer.
-
-
-
-
Next, slide down the air inlet and the setting dial to reveal the 11mm screws on each side of the handle at the bottom of the hair dryer.
-
-
-
There will be one visible screw on each side of the dryer at the bottom of the handle, measuring at 11mm.
-
Carefully unscrew both of these screws with a tri-point Y000 screwdriver.
-
-
-
Place the iFixit opening tool along the seams of the handle and pry the two pieces apart.
-
-
-
Once you have exposed the inside of the dryer, you will see a clear port at the very end where the cord is connected and plugged into.
-
Now, with your thumb and pointer finger gently pinch the top and bottom of the clear port.
-
Next with your free hand carefully pull the cord out of the port of the dryer handle.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
University of Alabama, Team 1-4, Bedsole Spring 2022 crwdns2935289:0University of Alabama, Team 1-4, Bedsole Spring 2022crwdne2935289:0
UA-BEDSOLE-S22S1G4
crwdns2931471:03crwdne2931471:0
crwdns2935297:010crwdne2935297:0
crwdns2947410:01crwdne2947410:0
buenas noches donde se puede comprar este repuesto (cable ) gracias
