crwdns2915892:0crwdne2915892:0
This repair guide will solve the squeaks sound of the ceiling fan after few years of operation. Youtube guide available show how-to replace the two wear out ball bearing.
crwdns2942213:0crwdne2942213:0
crwdns2936621:0crwdne2936621:0
-
-
First, remove the mounting screws of the plastic cover located along the brim, farthest from the centre.
-
-
-
The iron cage is firmly secured by three screws.
-
Out of the six mounting screws located along the inner circle, three of them will be the mounting screws for the iron cage.
-
Remaining six screws will be the mounting screws for the fan blade.
-
-
-
Remove the wiring from the terminal block and the capacitor from the bracket.
-
Unscrew the 13mm mounting bolt to remove the supporting rod.
-
-
-
Remove the safety cord.
-
Use plier to loosen the holder.
-
The back plate can be removed once all the electric components are removed.
-
-
-
-
Knock off the back plate by positioning it up-side down.
-
-
-
Use three crawl puller, to remove the bearing.
-
Spray lubricant prior to extraction.
-
-
-
Use a two crawl puller to remove the bearing located 4mm away from the tip.
-
-
-
A 3" long PVC tube of 6/8 " inner diameter, is used to install the new bearing (6302z for this model of fan).
-
Rubber mallet is used to punch the PVC tube during installation.
-
-
-
The same PVC tubing can be used to give the bearing a final push.
-
-
-
Apply mechanical grease around the inner wall of the iron cage.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:017crwdne2935229:0
crwdns2944067:04crwdne2944067:0
my ceiling fan would sometimes not start and making rumbling sounds (bearings) i did not want to replace or tear down so lifted plastic cover on top and liberally sprayed machine oil over exposed bearing & through slots underneath wd 40 this has cured problem perfectly just dry bearings would probably be better to use spray grease if you have --cheaper than new fan or bearings and only a few minutes work
My fan was not working what probelm
Thanks! I took apart my fan, thank you to your precise instructions. Used lithium grease and right now, enjoying quiet fan in my bedroom
price of the ceiling fan bearing
