crwdns2915892:0crwdne2915892:0
This guide is intended to show a non expert how to properly replace a broken sprinkler extension. A broad overview of the steps include digging a hole, unscrewing the extension, and replacing the extension. All you need are some basic tools and general knowledge about actions you preform on a daily basis. Before beginning the project, make sure the water is off and check for hazardous insects. Be aware that digging forcefully could damage the pipeline.
crwdns2942213:0crwdne2942213:0
-
-
Dig a one foot wide hole around the broken sprinkler extension down to the pipe fitting.
-
-
-
Dig around the pipe fitting with a trowel to provide clear access.
-
-
-
-
Clean the area around the fitting with water until the fitting is mostly free of dirt.
-
-
-
Unscrew the sprinkler extension from the pipe fitting.
-
-
-
Screw the new sprinkler extension in securely.
-
-
-
Test the sprinkler to ensure that there are no leaks.
-
Refill the hole tightly.
-
If you have completed the steps successfully you should have a fully functioning sprinkler extension.
If you have completed the steps successfully you should have a fully functioning sprinkler extension.