crwdns2915892:0crwdne2915892:0
Stalled printer for error 0xF2 or 0xF3
This error happens when there are some problems with the encoder when the roller tries to move paper.
crwdns2942213:0crwdne2942213:0
-
-
Remove the paper tray
-
Remove the paper cassette
-
Remove the ink tanks.
-
-
-
-
Remove the last back panel screw (hidden behind the LCD display)
-
-
-
Remove the main back panel, being careful not to damage the LCD display
-
-
-
Clean the left roller very gently with a dry tissue or a soft brush
-
-
-
Clean the right encoder very gently with a dry tissue or a soft brush.
-
-
-
If you want to test the printer you need to insert paper, and cover 2 switches with tape.
-
-
-
Reassemble the printer (remove the tape first if you have used it) following these instructions in reverse.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:016crwdne2935229:0
crwdns2947412:014crwdne2947412:0
It's works, thanks
Perfect. I used this guide to disassemble my printer.
I had 0xF1 and/or 0xF4. The reason was some paper stuck between the gears of the paper feed (in this guide step 12).
I hope this hint will help others. I didn't find any info about these error code online.
Error descriptions I found here - http://www.fatalerrors.info/
Thank you very much ! This is a very useful and beautifully documented guide. Best wishes and greetings to the kind author of this guide from Bratislava, Slovakia.
George Pekarovic
muito obrigado pela ajuda
