crwdns2915892:0crwdne2915892:0
If you have to repair inner components you first must open the top cover.
crwdns2942213:0crwdne2942213:0
-
-
Remove all attachments such as drawers, water tank, brewing unit.
-
Carefully pull the steam button out. If it is too tight, first loosen the cover (steps 2 to 4), lift slightly and then push the ratchet nose with a small screwdriver.
-
-
-
The bean container is fixed with two Phillipps screws. Unscrew those.
-
Lift the bean container up und remove it from the device.
-
-
-
-
Remove the single T10 Torx screw on the rear edge of the top cover under the water reservoir.
-
Remove the single Phillipps screw on the rear edge of the top cover under the container of the coffee beans.
-
There are two Phillipps screws on the frontal unterside edge of the top cover. Turn them out.
-
-
-
Now the cover can be lifted off. Pull backwards, then diagonally forward. Remove the silicone hose from the water tank.
-
To reassemble your device, follow the above steps in reverse order.
To reassemble your device, follow the above steps in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2934873:0crwdne2934873:0
100%
crwdns2934883:0VauWehcrwdne2934883:0 crwdns2934875:0crwdne2934875:0
crwdns2934877:0crwdne2934877:0 ›