crwdns2915892:0crwdne2915892:0
This guide will show you how to remove a PCI card on your HP Compaq dx2000MT.
crwdns2942213:0crwdne2942213:0
-
-
Turn off your computer and remove the power cable by pulling it straight out of its socket.
-
-
-
Remove the two Phillips #2 screws that secure the case door to the device.
-
-
-
-
Remove the side case door by pushing towards the rear of the device with your hand.
-
Once you slide the door back, remove it by pulling it outwards from the device.
-
-
-
Remove the side case door by pushing towards the rear of the device with your hand.
-
Once you slide the door back, remove it by pulling it outwards from the device.
-
-
-
Remove the Torx T15 screwdriver holding the PCI card in place.
-
-
-
Remove the PCI card by pulling it out towards the side of the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:07crwdne2935229:0