crwdns2915892:0crwdne2915892:0
This guide will show you how to remove the case fan in your HP Compaq dx2000MT.
crwdns2942213:0crwdne2942213:0
-
-
Turn off your computer and remove the power cable by pulling it straight out of its socket.
-
-
-
Remove the two Phillips #2 screws that secure the case door to the device.
-
-
-
Remove the side case door by pushing towards the rear of the device with your hand.
-
Once you slide the door back, remove it by pulling it outwards from the device.
-
-
-
-
Remove the side case door by pushing towards the rear of the device with your hand.
-
Once you slide the door back, remove it by pulling it outwards from the device.
-
-
-
Remove the 3 prong power connector from the motherboard by pulling it outwards toward the side of the device.
-
-
-
Remove the 4 push fasteners from the case by:
-
Prying them outwards with a small flathead screwdriver and
-
Pulling them out with tweezers or plyers.
-
-
-
Remove the fan from the case by pulling it towards the front of the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0